Details:
- The flat board is a multi layer kraft paper hot pressed composite sheet. The layers are bonded evenly under constant pressure, so the whole board keeps consistent flatness and bending resistance across its face, rather than softening at one spot under load.
- Its main surface role is to protect goods against the pressure of packaging straps. The board sits between the band and the cargo, turning a narrow line load into an area load spread over the flat face, so no deep groove forms on the panel or carton surface.
- Maximum width reaches 200mm and thickness runs from 3mm to 8mm. Thinner boards suit light layer separation, while thicker boards are chosen for heavy stacked cargo, and the layer count can be adjusted to match the required rigidity.
- Length, width and thickness are produced to order. A buyer can send the pallet footprint or bundle dimension, and the workshop cuts the board to fit, slightly smaller than the pallet face when needed to avoid overhang during forklift handling.
- Finished boards are stacked flat with separating paper between each sheet. The separating layer stops surface friction scratch between boards in storage, and the flat stack keeps the sheets from warping before they are laid into a pack. The separating paper also keeps printed or glossy faces apart so they do not stick together in damp storage. Boards are counted and packed to a marked bundle, so the right number can be pulled for each pallet. Sheets are stored by thickness grade, so thick boards go to heavy loads and thin boards to light ones without mixing.
PRODUCT DIMENSIONS
DETAIL SHOT
SCENE IMAGE
OTHER PRODUCT IMAGES
ABOUT THE SUPPLIER
JahooPak develops flat board protectors as the surface and layer component of the paper edge protector series. While profiles guard corners and edges, the flat board handles strap pressure, layer friction and storage support. Our factory runs automated lines for slitting, gluing, press shaping, heat setting and cutting to any size, and raw kraft paper is checked for strength and moisture before production. The technical team reads pallet and bundle dimensions, confirms cargo weight and surface finish, then sets board width, thickness and cut shape to match. We support both bulk long term orders and small batch trial orders, and the QC team samples each batch for flatness, thickness and cut edge finish. We keep optimizing the composite layer structure and adhesive formula so the board stays flat under stacking pressure, and we aim to be a reliable partner for buyers who need surface and layer protection for panel, tile and glass cargo. Standard thickness runs from 3mm to 8mm, and the face can be finished in white, brown or PE moisture resistant white according to the cargo surface and storage climate. The line follows nine controlled stages from raw material, slitting, paper separating, glue applying, kraft entering, press shaping, heat setting, buckle forming to cutting any size, keeping board flatness and layer bonding consistent across the batch. Buyers may send pallet or bundle dimensions for a trial sheet sample, and common sheet sizes are stocked for urgent replenishment. Finished boards are stacked flat with separating paper and kept in a dry ventilated place before use.
PRODUCTION WORKFLOW
PACKAGING & SHIPPING SPECIFICATIONS
COMPANY OVERVIEW
