Performance and Reliability
- High tenacity polyester webbing keeps elongation low under sustained deck load
- Fitting strength held at 75 percent of webbing MBS on every graded line
- Assemblies graded to AAR501 Grade 4, 5, 6 and 7 for verifiable duty levels
- 40 mm line reaches 11000 lbs MBS and 4250 daN MSL for heavy flatbed work
- Formed steel ratchet frame with sprung pawl resists tooth slip under vibration
- Heat set cut edges slow the abrasion that ends strap life at the buckle
- Reinforced stitch at the hook eye keeps the loop square under off-axis pull
- Double J hook, flat hook and ring end matched to anchor type and pull direction
- Consistent MBS from roll to roll because webbing is woven on own looms
- Buckle bodies up to 3000 kg / 6600 lbs share the same load path as the webbing
JahooPak Ratchet Tie Down Specification
| Width | Length | Color | MBS | Joint Strength | System Strength | Max Securing Load | Certificate |
|---|---|---|---|---|---|---|---|
| 32 mm | 250 m | White | 4200 lbs | 3150 lbs | 4000 daN 9000 lbF | 2000 daN 4500 lbF | AAR L5 |
| 230 m | 3285 lbs | 2464 lbs | AAR L4 | ||||
| 40 mm | 200 m | 7700 lbs | 5775 lbs | 6000 daN 6740 lbF | 3000 daN 6750 lbF | AAR L6 | |
| Orange | 11000 lbs | 8250 lbs | 4250 daN 9550 lbF | 4250 daN 9550 lbF | AAR L7 |
JahooPak Ratchet Tie-Down Operation & Application
01
Open the Ratchet: Pull the release lever (spring catch) on the ratchet handle to unlock the mechanism and lay the handle flat.
02
Thread the Webbing: Wrap the strap around your cargo, feed the loose end through the center spool (mandrel) of the ratchet, and pull out any excess slack by hand.
03
Tension the Strap: Pump the ratchet handle back and forth—the anti-reverse gear mechanism will gradually wind the webbing and lock it tightly in place.
04
Quick Release: To unload cargo, pull and hold the spring-loaded release lever until the ratchet opens completely, then slide the webbing out freely.








