Specification and Selecting a Model
A specification table only helps when it is read in the right order. Start with system strength rather than width. The figure we publish is the load the strap and its matching buckle are rated to hold together, so a JS60 19 mm band at 760 kg is expected to hold 760 kg with a TB6 19 mm buckle, not with a 13 mm buckle forced on to it.
Next, match the band to what the load actually does. Static loads that sit still, such as a pallet of cartons in a warehouse, can work at roughly one third of the rated strength. Loads that move, settle or are handled by forklift need a wider margin, because a bundle loosens every time it is set down and picked up again. For steel coil and aluminium ingot we normally start from at least one band per 1,000 kg of coil weight, then check the coil eye and the contact edges before confirming the count.
Then compare length per roll with your packing pattern. JS40 gives 1,100 m at 13 mm, which suits high volume light cargo such as cartons and small bundles. JS105 gives 300 m or 230 m at 32 mm, which suits heavy coil where every strap is cut long. Ordering more metres than a shift can consume costs storage space; ordering too few means repeated roll changes. Both JS105 lengths exist because different coil diameters need different cut lengths.
Width and buckle size must agree. The TB series runs from 13 mm, the TB4 at 1/2 inch with 3.3 mm wire, up to 38 mm, the TB12 at 1-1/2 inch with 7.0 mm wire. A buckle narrower than the strap will cut into the band edge under tension, and one that is too wide will not seat the band flat. The THB group covers 32 mm to 50 mm heavy positions, including the THB10N, THB12N and THB14N narrow carton versions at 50, 30 and 30 pieces per carton.
Two series are offered so an existing line can be matched. The JS series steps through 13 mm to 32 mm in six models, with JS105 at 2,600 kg for the heaviest work. The TC series covers the same widths in different strength and length steps, including TC60L at 808 kg and 700 m, TC55 at 860 kg in 16 mm, and TC86 at 1,480 kg in 450 m and 500 m rolls. If your machine is already set for a TC width and tension, staying inside that series avoids resetting the track and the sealing head.
Confirm three things before the order is released:
- Which buckle model will be used
- The cut length per strap
- Whether the band will be applied by hand tool or by automatic machine
JahooPak Composite Cord Strap Specification
| Model | Width | System Tension | Length/Roll |
|---|---|---|---|
| JS40 | 13 mm | 480 Kg | 1100 m |
| JS50 | 16 mm | 680 Kg | 850 m |
| JS60 | 19 mm | 760 Kg | 600 m |
| JS65 | 900 Kg | 500 m | |
| JS85 | 25 mm | 1250 Kg | 500 m |
| JS105 | 32 mm | 2600 Kg | 300 m |
| 230 m | |||
| Specification of Buckle | |||
| Model | Width | Diameter | Volume/Box |
| JPB4 | 13 mm | 3.3 mm | 1000 PCS |
| JPB5 | 16 mm | 3.5 mm | 1000 PCS |
| JPB6 | 19 mm | 4.0 mm | 500 PCS |
| JPB8 | 25 mm | 5/6 mm | 250 PCS |
| JPB10 | 32 mm | 7.0 mm | 125 PCS |
| JPB12 | 38 mm | 7.0 mm | 100 PCS |
JahooPak Strap Band Application
Designed for compatibility and reliable performance, JahooPak JPB/JPBN Buckle Series is specially developed for use with JahooPak JS Series Composite Strap Band. This matched combination creates a strong and dependable strapping system, offering excellent fastening performance and high load-holding capacity.
The buckle-and-strap system provides a practical solution for securing heavy-duty cargo, supporting stable bundling and helping reduce the risk of strap loosening during transportation, warehousing, and cargo handling.









