Composite Cord Strap JS105 32mm 2600kg System Tension 300m Roll for Steel Coil

Short Description:

Composite Cord Strap / Polyester Composite Strapping
Raw Material High tenacity polyester webbing, reinforced core fiber structure
Available Model & Width JS40(13mm), JS50(16mm), JS60(19mm), JS65(19mm), JS85(25mm), JS105(32mm)
System Tension Range 480kg ~ 2600kg, different models for different load demands
Supporting Accessory Galvanized wire buckles, matched manual tensioning tools
Core Advantages High toughness, waterproof, corrosion resistant, recyclable, no sharp edge, safe operation
Application Timber, metal pipes, steel profiles, pallet cargo, paper rolls, chemical drums, heavy goods container shipment
Surface Option Smooth / embossed surface, plain or custom printed logo
Processing Way Manual strapping, suitable for small batch and field operation

Product Detail

Product Tags

PRODUCT HIGHLIGHTS

  1. Holds rated load with low creep through long transit and vibration.
  2. Will not shatter or splinter when handled in cold weather.
  3. Elastic recovery keeps coils and bundles tight as loads settle.
  4. Polypropylene coating seals the filament core against water and spray.
  5. Resists corrosion, so no painting, oiling or rework is needed.
  6. Tolerates high surface temperature without softening or marking goods.
  7. Will not scratch, stain or contaminate painted steel and aluminium.
  8. Cut ends stay flat and sealed, so the roll does not fray in storage.
  9. Single material body can be recycled completely after use.
  10. No sharp edges, so operators need no special protective gloves.

DETAIL SHOT

JahooPak-Composite-Cord-Strap-Product-Detail-2
JahooPak-Composite-Cord-Strap-Product-Detail-1

Every roll begins as a bundle of high tenacity polyester filament yarn, never as a monofilament and never as a mixed recycled blend. Hundreds of fine filaments are gathered, lightly twisted and formed into a flat core band, and that core is the part which actually carries the load. Polyester was chosen for the job because its load and elongation curve is predictable: it stretches a little under tension, then holds, instead of creeping or snapping back the way polypropylene does. That behaviour is what keeps a steel coil or a stack of bricks tight after a long road journey.

The core then passes through an extrusion coating die where polypropylene is bonded to both faces and both edges. The coating is not decoration. It seals the filaments against water and grit, gives the band a smooth low friction surface for automatic machines, and stops the yarn from fraying once the strap is cut. Because the coating wraps the edges, the finished band has a closed flat profile with square and even end faces, a detail that matters when the strap is threaded through a narrow buckle slot or a machine track.

After coating the band is cooled in a water bath, dried, and drawn through a pulling frame that orientates the molecules in the polyester core. This drawing stage is where the number on the label is actually created. The same yarn, drawn further, gives a higher breaking load in a narrower width, which is why one 19 mm band is rated at 760 kg while another 19 mm band reaches 900 kg, and why we publish them under separate model numbers instead of one vague width class.

Surfacing comes next. Plain strap leaves the line with a glossy finish that slides easily through tools and guides. Embossed strap is pressed between a patterned roller to give a matt textured face that grips carton edges and hides scuffs from repeated handling. Both versions can be left unmarked or printed with a customer logo, a load rating or a batch code, and printing is done inline so the ink passes the same check as the strap.

Finally each roll is wound to a fixed length, taped, weighed and labelled with model, width, rated strength and length. Roll ends are square and flat, so rolls stack without leaning and feed without tangling. A retained sample is kept from every batch, which is how a strength question can be traced back to a specific drawing setting months after shipment.

CUSTOMIZATION CAPABILITIES

d4c78aed5ea3d476e6334305a2fb57a3
屏幕截图 2026-11-16 095033

Composite Cord Strap Manual Operation Steps For Cargo Bundling

4a4207b1979895da4a0c9e32861867df

JahooPak Strap Band Application

dfc72e24ac1cfad4cbdbaffd76440866

OTHER PRODUCT IMAGES

jahoopak-8in1

COMPANY OVERVIEW

Most strapping factories build to a fixed drawing, while Jiangxi JahooPak Co., Ltd. develops composite cord strap from the working conditions customers actually run. With eighteen years in transport packaging, a 15000 square meter intelligent plant and a complete quality control chain, we collect field feedback from container yards, timber mills, steel processors and brick plants. The recurring failures are consistent: a strap wears fast because the wrong buckle was used, tension fades after a long haul, or the band turns brittle inside a hot warehouse. JahooPak feeds those cases back into material formula and process settings instead of answering them with a sales script. We also state the boundary between composite cord strap and woven lashing strap plainly, and print the buckle rule in the catalogue, on the carton and in the technical sheet, because a phosphate buckle will grind a composite strap away while a galvanized buckle gives a woven strap too little grip. The JS series covers 480 kg to 2600 kg in graded steps so a buyer can scale up without changing supplier. Every finished roll is sampled for breaking force, high temperature ageing and tension retention. New customers can start with a small trial order and verify performance on their own loading dock before committing to volume. Our sales team works with the technical department rather than ahead of it, so an enquiry ends in a recommended specification and accessory list, not only a price. Production efficiency is improved continuously to hold price while quality stays flat, and the after sales channel answers overseas questions within the working day.

strapping band (4)

  • Previous:
  • Next: