Product Detail
Product Tags
ℹ
The cut end in this photo is the fastest way to tell a composite cord strap from a strip of extruded plastic. What opens up at the cut is not a solid section with a printed line pattern on it, but a dense bundle of fine polyester filaments running the full length of the strap, wrapped and bonded inside a polypropylene jacket. That jacket is what gives the strap its flat rectangular shape, its white surface and its water resistance; the filaments underneath are what carry the tension. When the strap is cut, the jacket releases and the filament bundle fans out, which is the frayed, brush-like end you see here. The construction explains the numbers on the specification sheet: the same cord bundle can be built into widths from 13 mm to 32 mm and rated from 480 kg to 2600 kg system tension, because strength comes from the number and size of filaments rather than from the thickness of a homogeneous plastic strip. It also explains the behaviour in service. Tension is shared across many filaments instead of being concentrated in one solid section, so a nick at a pallet corner or a burr on a steel coil damages a few filaments and leaves the rest working. The jacket keeps the bundle aligned, keeps moisture out of the core and provides a smooth face where the buckle slides. The same test works in reverse when a cheaper offer arrives. Cut a sample across and look at the section: a mono-extruded strap shows a solid, glassy block with no fibre ends and no direction to it, while a genuine cord strap shows the bundle immediately. Two straps of the same width can look identical on the outside and behave completely differently once tensioned, which is why this close-up belongs near the top of a detail page rather than in a footnote.
JahooPak Composite Cord Strap Specification
| Model |
Width |
System Tension |
Length/Roll |
| JS40 |
13 mm |
480 Kg |
1100 m |
| JS50 |
16 mm |
680 Kg |
850 m |
| JS60 |
19 mm |
760 Kg |
600 m |
| JS65 |
900 Kg |
500 m |
| JS85 |
25 mm |
1250 Kg |
500 m |
| JS105 |
32 mm |
2600 Kg |
300 m |
| 230 m |
| Specification of Buckle |
| Model |
Width |
Diameter |
Volume/Box |
| JPB4 |
13 mm |
3.3 mm |
1000 PCS |
| JPB5 |
16 mm |
3.5 mm |
1000 PCS |
| JPB6 |
19 mm |
4.0 mm |
500 PCS |
| JPB8 |
25 mm |
5/6 mm |
250 PCS |
| JPB10 |
32 mm |
7.0 mm |
125 PCS |
| JPB12 |
38 mm |
7.0 mm |
100 PCS |
JahooPak Strap Band Application
Designed exclusively for
JahooPak JS Series
Polyester Composite Strapping, JPB/JPBN Wire Buckles provide maximum joint strength and load stability. This heavy-duty strapping system safely secures metal pipes, steel wires, lumber, and boxed pallets during transit.
Previous:
19mm Polyester Composite Cord Strapping 760kg for Heavy Duty Pallet Bundling
Next:
Industrial PET Polyester Strapping Roll 9-25mm with 150-1100kg Tensile Strength for Heavy Duty Coil and Stone Packing